What agency billing software does
Agency billing software takes client work from plan to payment: the budget, the time logged against it, the invoice and the export to your books. What sets it apart from a generic invoicing tool is that the invoice has to match work spread across people, projects and months, often under more than one billing model for the same client.
A typical agency rarely has one model. A website build is quoted as a fixed fee, the care plan that follows is a monthly subscription, and the odd extra request is billed by the hour. Some clients prefer to buy a block of hours or credits up front and draw it down.
- Hourly: the client pays for the time the work takes.
- Fixed project: one agreed price for a defined scope, usually split into a deposit and stage payments.
- Retainer or subscription: a recurring monthly fee for ongoing work, such as a care plan or marketing support.
- Credits or prepaid hours: the client buys a block of work in advance and it is drawn down as requests are delivered.
The four billing models compared
Each model shifts risk between you and the client in a different way. The table shows where each one fits and what your software has to do to bill it without extra admin.
| Model | Best for | Main risk | What the software must do |
|---|---|---|---|
| Hourly | Open-ended work, small requests, consulting | Unlogged time and invoices clients question | Turn approved time into invoice lines, with rates per role |
| Fixed project | Builds with a clear scope, such as a website | Scope creep that eats the margin | Track real hours and spend against the budget as the work runs |
| Retainer or subscription | Care plans, ongoing marketing, support | Doing more work than the fee covers | Recurring invoices plus a monthly budget to deliver against |
| Credits or prepaid hours | Clients who buy work in blocks | Losing track of what is left | Record the purchase and draw it down as work is delivered |
What to look for in agency billing software
Before you choose a tool, check that it covers the whole path from plan to payment. These are the points that decide whether month-end billing takes an hour or two days.
- Every billing model you use: hourly, fixed project, subscription or retainer, and credits, with more than one model on the same client when you need it.
- Time to invoice without retyping: hours are logged against the project and task, then become invoice lines at the right rate per role or person.
- Approvals before anything goes out: timesheets submitted and approved every week or month, closed periods locked, and invoices checked by a second person before they are sent.
- Budget vs actual while the work runs: real hours and real spend against the plan, so you can act before a fixed fee turns into a loss.
- Deposits and stage invoices: an invoice before work starts, then the rest in agreed stages.
- Client visibility: clients see their invoices with hours, rate and due date in one place, so fewer questions come back by email.
- Accounting export: clean data your accountant can import, or a live sync if your books depend on one.
- Sensible permissions: costs, rates and margins stay with the people who need them.
Three common billing setups, compared
Most agencies end up with one of three setups. Each can work. The right one depends on how many people log time, how many billing models you use and how much month-end admin you are willing to carry.
A spreadsheet plus an invoicing tool is where most agencies start. It costs little and bends to any process, but every number is typed by hand: hours come from people’s notes, budgets live in a sheet and invoices are rebuilt each month. It holds up with a few clients on one billing model, and starts to leak once several people log time or clients mix models.
A time tracker plus accounting software is the usual next step. Hours get accurate, and dedicated tools such as Harvest add invoicing, online payment and a sync to QuickBooks Online or Xero. Projects and client conversation still live in other tools, so the plan and the bill sit in different places. See Robust vs Harvest for a closer look.
An all-in-one agency tool keeps projects, time, budgets and invoices on the same record, so approved hours become invoice lines and budget vs actual is always current. The trade-offs are a bigger switch, a higher monthly price than a single-purpose tool, and features that can depend on the plan, so check that billing, approvals and the client view are on the plan you would buy. Robust and Teamwork.com both sit in this group; see Robust vs Teamwork.
| Setup | Works well when | Where it breaks | Month-end work |
|---|---|---|---|
| Spreadsheet plus invoicing tool | A few clients, one billing model, one or two people logging time | Unlogged hours, budgets that drift, invoices rebuilt by hand | High: every invoice is put together by hand |
| Time tracker plus accounting software | Accurate hours and online payment matter most | The plan, the client conversation and the bill live in different tools | Medium: hours flow to invoices, budgets are reconciled separately |
| All-in-one agency tool | Several people, several billing models, clients who want one place | A bigger switch and a higher price; some features may sit on higher plans | Low: approved time becomes the invoice |
Billing mistakes that cost agencies the most
Most lost revenue in an agency is not from bad pricing. It comes from small leaks that repeat every month.
Unbilled hours are the most common. Time is logged late or not at all, so it never reaches an invoice. Weekly timesheets with an approval step close most of that gap, because missing time is noticed while people still remember it.
Scope creep is the second. Extra requests arrive in chat or email, get done, and are never quoted. A simple rule helps: anything outside the agreed scope becomes a request with an estimate before work starts.
Late invoicing is the third. An invoice sent three weeks after month end gets paid later, and is more likely to be questioned. Invoicing on a fixed schedule, from data that is already approved, keeps cash flow predictable.
Finally, work often starts before the deposit lands. Agree in the contract whether work begins on signature or on payment, and send the deposit invoice the same day. Our free client onboarding checklist covers this step and the rest of the first month.
How to price a retainer
A retainer price should come from cost, not from what feels right. Start with the hours you expect to deliver each month, add the time spent managing the account, such as meetings, reporting and coordination, and multiply by what an hour of your team actually costs you.
That hourly cost depends on how much of your team’s time is billable. If you are not sure, work it out with the utilization rate calculator.
Add any tools or pass-through costs, then set the margin you need on top. Check the effective hourly rate the fee works out to, and compare it with what you charge for one-off work. Our free agency retainer calculator does this math for you and shows how the price changes at different margins.
Then put the scope, hours and terms in writing before the first month starts. Our retainer agreement template is a starting point.
How Robust handles agency billing
Robust is the agency operating system Design in DC built to run its own client work, and billing is part of the same project record as the chat, tasks and time.
Each project has a budget planner with a line per role, an hourly rate or a fixed price, hours, markup and the margin you want. Real hours and real spend fill in from the timesheets, so you see budget vs actual as the work runs. Retainers and care plans get a monthly budget for the year, approved by the people you choose.
Your team logs time against the project and task, submits it weekly or monthly, and managers approve it. Closed periods lock, so last month’s invoices and contractor pay stay exactly as they were. See time tracking for the full workflow.
Invoices are built from the same data, with lines grouped by role, by phase or both. You can add a markup, send a deposit invoice before work starts, and set each project up as hourly, fixed, a monthly subscription or prepaid credits. Pending invoices wait for an admin, then go out as a PDF by email from Robust, and you see when they are delivered. More on billing in Robust.
- Statuses across every client: draft, pending, approved, sent, paid and overdue.
- Clients see their invoices in the portal with billable hours, rate and estimated pay date.
- Timesheets and contractor bills export in Xero’s import format, with a link to each record in Xero. There is no live sync.
- Costs and payments are hidden from team members, guests and clients.
- No online payment: clients pay by your usual method, such as bank transfer.
Questions to ask before you choose
Every tool looks complete in a demo. These questions show quickly whether it fits how your agency actually bills.
If the answers involve exports, copy and paste or a second app for each step, the time you save on invoicing will be spent reconciling instead. You can compare Robust plans on our pricing page; every feature is on every plan.
- Can one client have a fixed-fee project and a monthly plan at the same time?
- Do approved hours become invoice lines without retyping?
- Can we see budget vs actual on a project before it ends?
- Which plan includes timesheet approvals and invoicing?
- Who can see costs and margins, and can we restrict it?
- What does the client see, and where?
- How does the data reach our accountant?
Free tools and further reading
To price a retainer, use the agency retainer calculator, and check how much of your team’s time is billable with the utilization rate calculator. Both are free and work whatever software you run.
To agree the terms and start well, use the retainer agreement template and the client onboarding checklist, which runs from the signed contract and deposit invoice to a steady weekly rhythm.
For the client side, read our guide to client portals for agencies: what clients should see, invoices included.